NEWS

Shandong Chaoyu Shelf Co., Ltd.

Comparison of Light and heavy shelves

发布时间：

2022-09-07

There are many types of shelves due to different needs, but some customers will have a lot of problems because they are not part of the industry. First of all, they are both shelves. Why is this shelf so expensive while that one is cheaper? For example, heavy shelves are much more expensive than light shelves. Why? In fact, insiders look at the door, what is the "way"? Let's follow Xiaobian and have a look!

In fact, it is not about who is expensive and who is cheap, but the value reflects the price. Heavy shelf and light shelf are two different styles, they are used for different purposes. For example, when it comes to load-bearing, this is a clear difference. The basic bearing capacity of heavy shelves is generally above 500kg. In the theoretical design, the bearing capacity can reach about 2-3 tons. Of course, this needs the corresponding design and material selection, and the light shelf corresponding "cheap" a lot. Light shelf is generally considered to be a butterfly hole frame, with a load of about 100-200kg, and most of them are fixed specifications. Light warehouse shelves are mostly placed light, such as personal e-commerce small warehouse, light industrial products, civil products and so on. The price is relatively cheap, ranging from tens to hundreds of yuan. Heavy shelves are much more expensive, ranging from hundreds to thousands of yuan. Heavy shelves are mostly custom products, customized according to different warehousing situations.

Whether to use light or heavy shelves depends on the specific situation of the goods and storage of each company. If there are many and mass purchases, it is necessary to contact the storage shelf manufacturers for design and customization.

Related news

What is cantilever shelf?

12-21

Cantilever type shelf is a kind of heavy shelf, cantilever type shelf is suitable for storing long raw materials, ring raw materials, furniture boards, pipe fittings and irregular goods, cantilever can be single or two sides, cantilever type shelf has a stable structure, good load working capacity, high space utilization. The height ratio of cantilever shelf is usually within 2.0 meters (if the goods are stored by electric forklift truck, it can reach 6 meters), the length of the cantilever is within 1.5 meters, and the bearing capacity of each arm is usually within 800KG. Cantilever shelf vertical rod is made of H section steel or cold rolled channel steel, cantilever is made of square steel pipe, cold rolled channel steel or H section steel, between cantilever and vertical rod is made of insert type or screw connection type, between base and vertical rod is made of thread connection type, and cold rolled channel steel or H section steel is made of base. Cantilever shelves are ideal solutions for heavy, scattered or other special goods. Cantilever shelves have two arms and arms for efficient storage of wood, pipe fittings, bars and other similar goods. Cantilever shelf is arranged on the traditional storage shelf support of the outer cantilever, is a kind of long object special storage shelf. Cantilever shelves are used in the field of mechanical equipment manufacturing and building materials mall, etc., plus the shelf, especially suitable for small indoor space, relatively low height of the warehouse, convenient management method, spacious sight line, the use rate is higher than the general storage shelves.

Classification of stereoscopic warehouse shelves

12-15

Three-dimensional warehouse shelves refer to the shelves used to place goods in the warehouse, which is widely used in industrial warehouses. Three-dimensional warehouse shelves focus on the upward development, make full use of the storage space of the warehouse, his height can reach more than 40 meters, and ordinary shelves are only 3~5 meters, according to the classification of structure, three-dimensional warehouse shelves can be divided into beam shelves, Corridor shelves, gravity shelves, attic shelves and so on. The next step is to analyze the types of three-dimensional warehouse shelves with you one by one, to help you have a deeper understanding of three-dimensional warehouse shelves. In the three-dimensional warehouse shelves, the beam shelf is more convenient and faster in the storage of goods, which ensures that any kind of goods are first-in, first-out and there is no restriction of the type of forklift truck. It can pick up goods at a faster speed. Its space utilization rate can be as high as 30%~50%, and the specific utilization rate is determined by the type of forklift truck. Which is usually the shelf of its storage density is relatively high, is advanced after the type of part, when the pick up has 20%~30% of the space utilization rate, but in fact, the pick up speed is relatively general, its storage space can reach 60% of the overall warehouse, that is to say, it can make full use of 60% of the space. Gravity shelf, its working efficiency is relatively high, and the density is very high, at present. Secondly, the free access type design is adopted. The circulation rate of inventory is very high, and the goods can be picked up according to the order. The speed of picking up goods is relatively fast. Usually for 2 to 3 layers can be designed to lift goods elevator and stairs and simple attic shelves, in fact, the use of double column as a support part of the risk or card can be applied to some warehouses, relatively high, at the same time the goods are relatively light, the need for artificial storage warehouse, when the inventory is relatively large, you can use the elevator or hydraulic lifting platform. Cantilever shelf is an important kind of shelf in the three-dimensional warehouse. Cantilever shelves are suitable for storing long materials, ring materials, plates, pipes and irregular goods. Cantilever can be single-sided or double-sided, cantilever shelf has stable structure, good load capacity, high space utilization. Cantilever shelf column mostly uses H beam or cold rolled beam, cantilever uses square tube, cold rolled beam or H beam, cantilever and; The column is inserted or bolted, the base is bolted to the column, and the base is made of cold-rolled section steel or H-section steel.

Are you using storage shelves correctly?

12-09

Storage shelf is an important storage equipment in modern industry. If there is unreasonable operation in use, it will lead to the stagnation of goods access and affect the progress of work. How to use the shelf to make the most of it? The following is a simple understanding of how to optimize the warehouse shelf? Warehouse shelves should be classified reasonably. Each area should plan what items to put, and then mark the name, model and quantity of goods on the shelves. The third suggestion is to set up the waiting area and the batching area in the warehouse to facilitate the warehousing and discharging of goods.

How to prevent light shelf deformation in use?

12-07