NEWS

Shandong Chaoyu Shelf Co., Ltd.

What are the characteristics of Weifang shuttle shelves?

发布时间：

2022-09-23

Shuttle storage shelf, also called shuttle shelf, is a high-density centralized storage system composed of storage shelves, vehicles and forklifts. When using shuttle shelves, the operator will issue instructions to the vehicle according to the controller, and the vehicle will bear pallet goods to move the goods in the roadway. The vehicle can also be used in multiple tunnels. It only needs to use forklifts to move it to different lanes, and the forklifts do not need to enter and exit the storage shelves. Storage shelf can be designed for 20-40 pallet depth, just in the front or front and rear ends of the storage shelf, leave a working channel.

Weifang Chaoyu shelf summed up the shuttle car storage shelf has the following characteristics:

1. Save a lot of forklift working channels, so that the warehouse space utilization efficiency can reach more than 80%. Under the same warehouse area, the storage capacity is increased by about 20% compared with the drive-in storage shelf, and the real high-density storage is realized.

2. One forklift operator can also work on multiple shuttle vehicles at the same time, which greatly reduces the waiting time and significantly improves the work efficiency.

3. The working mode is convenient. The storage mode of goods can also be first-in, first-out, or first-in, last-out.

4. The forklift does not need to enter and exit the storage shelf, which reduces the collision between the storage shelf and the forklift, and improves the production efficiency.

5. The lighting regulations are relatively low. Compared with other types of storage shelves, the overall project investment is less.

Related news

What is cantilever shelf?

12-21

Cantilever type shelf is a kind of heavy shelf, cantilever type shelf is suitable for storing long raw materials, ring raw materials, furniture boards, pipe fittings and irregular goods, cantilever can be single or two sides, cantilever type shelf has a stable structure, good load working capacity, high space utilization. The height ratio of cantilever shelf is usually within 2.0 meters (if the goods are stored by electric forklift truck, it can reach 6 meters), the length of the cantilever is within 1.5 meters, and the bearing capacity of each arm is usually within 800KG. Cantilever shelf vertical rod is made of H section steel or cold rolled channel steel, cantilever is made of square steel pipe, cold rolled channel steel or H section steel, between cantilever and vertical rod is made of insert type or screw connection type, between base and vertical rod is made of thread connection type, and cold rolled channel steel or H section steel is made of base. Cantilever shelves are ideal solutions for heavy, scattered or other special goods. Cantilever shelves have two arms and arms for efficient storage of wood, pipe fittings, bars and other similar goods. Cantilever shelf is arranged on the traditional storage shelf support of the outer cantilever, is a kind of long object special storage shelf. Cantilever shelves are used in the field of mechanical equipment manufacturing and building materials mall, etc., plus the shelf, especially suitable for small indoor space, relatively low height of the warehouse, convenient management method, spacious sight line, the use rate is higher than the general storage shelves.

Classification of stereoscopic warehouse shelves

12-15

Three-dimensional warehouse shelves refer to the shelves used to place goods in the warehouse, which is widely used in industrial warehouses. Three-dimensional warehouse shelves focus on the upward development, make full use of the storage space of the warehouse, his height can reach more than 40 meters, and ordinary shelves are only 3~5 meters, according to the classification of structure, three-dimensional warehouse shelves can be divided into beam shelves, Corridor shelves, gravity shelves, attic shelves and so on. The next step is to analyze the types of three-dimensional warehouse shelves with you one by one, to help you have a deeper understanding of three-dimensional warehouse shelves. In the three-dimensional warehouse shelves, the beam shelf is more convenient and faster in the storage of goods, which ensures that any kind of goods are first-in, first-out and there is no restriction of the type of forklift truck. It can pick up goods at a faster speed. Its space utilization rate can be as high as 30%~50%, and the specific utilization rate is determined by the type of forklift truck. Which is usually the shelf of its storage density is relatively high, is advanced after the type of part, when the pick up has 20%~30% of the space utilization rate, but in fact, the pick up speed is relatively general, its storage space can reach 60% of the overall warehouse, that is to say, it can make full use of 60% of the space. Gravity shelf, its working efficiency is relatively high, and the density is very high, at present. Secondly, the free access type design is adopted. The circulation rate of inventory is very high, and the goods can be picked up according to the order. The speed of picking up goods is relatively fast. Usually for 2 to 3 layers can be designed to lift goods elevator and stairs and simple attic shelves, in fact, the use of double column as a support part of the risk or card can be applied to some warehouses, relatively high, at the same time the goods are relatively light, the need for artificial storage warehouse, when the inventory is relatively large, you can use the elevator or hydraulic lifting platform. Cantilever shelf is an important kind of shelf in the three-dimensional warehouse. Cantilever shelves are suitable for storing long materials, ring materials, plates, pipes and irregular goods. Cantilever can be single-sided or double-sided, cantilever shelf has stable structure, good load capacity, high space utilization. Cantilever shelf column mostly uses H beam or cold rolled beam, cantilever uses square tube, cold rolled beam or H beam, cantilever and; The column is inserted or bolted, the base is bolted to the column, and the base is made of cold-rolled section steel or H-section steel.

Are you using storage shelves correctly?

12-09

Storage shelf is an important storage equipment in modern industry. If there is unreasonable operation in use, it will lead to the stagnation of goods access and affect the progress of work. How to use the shelf to make the most of it? The following is a simple understanding of how to optimize the warehouse shelf? Warehouse shelves should be classified reasonably. Each area should plan what items to put, and then mark the name, model and quantity of goods on the shelves. The third suggestion is to set up the waiting area and the batching area in the warehouse to facilitate the warehousing and discharging of goods.

How to prevent light shelf deformation in use?