NEWS

Shandong Chaoyu Shelf Co., Ltd.

What are the advantages of mold shelf


发布时间:

2022-10-09

What are the advantages of mold shelf? There are mainly the following aspects

1. The goods in the mold shelf are easy to access, easy to count and measure, and can be fifO.

2. The structure and function of mold frame are conducive to warehouse management, mechanization and automation.

3. To ensure the quality of goods, measures such as moisture-proof, dustproof, anti-theft, and damage prevention can be taken to improve the quality of material storage.

4. Mold rack is a kind of shelf structure, which can make full use of warehouse space, improve the utilization rate of warehouse capacity, and expand the storage capacity of warehouse.

5. The goods stored on the mold shelf will not squeeze each other, and the material loss is small, which can fully ensure the function of the material itself and reduce the loss of the goods.

Related news

Cantilever type shelf is a kind of heavy shelf, cantilever type shelf is suitable for storing long raw materials, ring raw materials, furniture boards, pipe fittings and irregular goods, cantilever can be single or two sides, cantilever type shelf has a stable structure, good load working capacity, high space utilization. The height ratio of cantilever shelf is usually within 2.0 meters (if the goods are stored by electric forklift truck, it can reach 6 meters), the length of the cantilever is within 1.5 meters, and the bearing capacity of each arm is usually within 800KG. Cantilever shelf vertical rod is made of H section steel or cold rolled channel steel, cantilever is made of square steel pipe, cold rolled channel steel or H section steel, between cantilever and vertical rod is made of insert type or screw connection type, between base and vertical rod is made of thread connection type, and cold rolled channel steel or H section steel is made of base. Cantilever shelves are ideal solutions for heavy, scattered or other special goods. Cantilever shelves have two arms and arms for efficient storage of wood, pipe fittings, bars and other similar goods. Cantilever shelf is arranged on the traditional storage shelf support of the outer cantilever, is a kind of long object special storage shelf. Cantilever shelves are used in the field of mechanical equipment manufacturing and building materials mall, etc., plus the shelf, especially suitable for small indoor space, relatively low height of the warehouse, convenient management method, spacious sight line, the use rate is higher than the general storage shelves.


Three-dimensional warehouse shelves refer to the shelves used to place goods in the warehouse, which is widely used in industrial warehouses. Three-dimensional warehouse shelves focus on the upward development, make full use of the storage space of the warehouse, his height can reach more than 40 meters, and ordinary shelves are only 3~5 meters, according to the classification of structure, three-dimensional warehouse shelves can be divided into beam shelves, Corridor shelves, gravity shelves, attic shelves and so on. The next step is to analyze the types of three-dimensional warehouse shelves with you one by one, to help you have a deeper understanding of three-dimensional warehouse shelves. In the three-dimensional warehouse shelves, the beam shelf is more convenient and faster in the storage of goods, which ensures that any kind of goods are first-in, first-out and there is no restriction of the type of forklift truck. It can pick up goods at a faster speed. Its space utilization rate can be as high as 30%~50%, and the specific utilization rate is determined by the type of forklift truck. Which is usually the shelf of its storage density is relatively high, is advanced after the type of part, when the pick up has 20%~30% of the space utilization rate, but in fact, the pick up speed is relatively general, its storage space can reach 60% of the overall warehouse, that is to say, it can make full use of 60% of the space. Gravity shelf, its working efficiency is relatively high, and the density is very high, at present. Secondly, the free access type design is adopted. The circulation rate of inventory is very high, and the goods can be picked up according to the order. The speed of picking up goods is relatively fast. Usually for 2 to 3 layers can be designed to lift goods elevator and stairs and simple attic shelves, in fact, the use of double column as a support part of the risk or card can be applied to some warehouses, relatively high, at the same time the goods are relatively light, the need for artificial storage warehouse, when the inventory is relatively large, you can use the elevator or hydraulic lifting platform. Cantilever shelf is an important kind of shelf in the three-dimensional warehouse. Cantilever shelves are suitable for storing long materials, ring materials, plates, pipes and irregular goods. Cantilever can be single-sided or double-sided, cantilever shelf has stable structure, good load capacity, high space utilization. Cantilever shelf column mostly uses H beam or cold rolled beam, cantilever uses square tube, cold rolled beam or H beam, cantilever and; The column is inserted or bolted, the base is bolted to the column, and the base is made of cold-rolled section steel or H-section steel.


In the design of lightweight shelf specifications, should consider the use of requirements, equipment conditions, load weight, material supply and installation conditions and other factors. The dimensional tolerance, deformation and clearance of the light shelf shall meet the relevant standards. Light shelves should be used correctly. Goods should be placed according to load-bearing shelves. Avoid collision between forklift trucks and shelves. It is best to configure anti-collision Angle, anti-collision bar and other anti-collision equipment. Locking devices must be provided at both ends of each beam of the light shelf so that the beam can be firmly fixed to the column to prevent separation due to upward force. In order to ensure the meshing of the beam and its locking device, the normal operation of the beam lock or the fastening of screws and nuts should be checked regularly during use, and the damaged device should be replaced in time. The installation site should be smooth, without ground depression and inequality. The column feet of light shelf posts should be properly fixed on the concrete foundation, while heavy shelves need to be fixed with tension and explosion-proof screws that are closely connected to the ground. The settlement value of light shelf foundation should be strictly controlled to ensure the normal use of shelf structure. In the design of non-integrated warehouse shelf, attention should be paid to the separation of shelf foundation and building column foundation, so as to prevent the damage of the warehouse shelf structure caused by the force.